Welcome to littleBits forums! Please introduce yourself :)

Hi My name is Karen Fasino. I use Little Bits with 6th grade G&T students. Admittedly, these kiddos are much smarter than me especially when it comes to coding. A few students are having trouble uploading their code and were wondering if they have TOO much code to upload! Please advise.

could this help ?


hi my name is kalen ruffing

Hey folks, m y name is Casper from the Netherlands. Getting started with Littlebits and wanting to use them in workshops about interactive objects. Loving the synth kit too btw.

1 Like

Hi! I’m Gena. I only started working with littleBits about two weeks ago when I being a TA for a computer science camp over this summer. We work mostly with students in elementary and middle school.
I’m a junior in high school, and I’m looking to go into computer science or cyber security. Honestly, wherever my hobbies take me at this point.


Hi, I’m interested in electronics and programming, looking forward to working with you guys.

1 Like

Hi there! that sounds really cool.

Hi all

I’m Alex Xavier, I’m a food scientist working for an MNC called Kancor Mane, and I work in the global spice extraction department specializing in Ajowan extract. I wish I could get take and give some insights in this forum.
I’m happy to interact here.


Welcome Gena, thanks for connecting with us and sharing your interest in computer science. I hope you had a great TA experience. Did the camp use littleBits?

Hi all

I am wondering if anyone has any ideas to do the following? This is my first project working with Arduino and I need help!
I am using a 4 wire stepper motor (Nema 17 stepper motor 1.7 A).

My goal is to have a stepper be controlled by a button, I would like it so when you press the button it tells the stepper to move a certain amount of rotations.

If anyone can help that would be amazing!

Below are the parts that I currently have! Willing to purchase other parts if needed!

Parts list:
1 x CNC Shield Board
1 x Longruner UNO R3 Board
1 x 1.5m USB cable for R3 Board
3 x Nema 17 stepper motor 1.7 A (with bracket and screw)
3 x Mechanical Switch Endstop
3 x 3Pin 70cm Cable
4 x DRV8825 Stepper Motor Driver
4 x Aluminum heatsink w/ 3M tape backing
1* 400 tie-points Breadboard
1* Power Supply Module
20* Female-to-male Dupont Wire
1* 65 Jumper Wire
1* Precision Potentiometer
1* Active Buzzer
1* IC 4N35
1* Passive Buzzer
1* Thermistor
1* IC 74HC595
5* Diode Rectifier (1N4007)
5* NPN Transistor (PN2222)
2* Photoresistor
10* Button
10* White LED
10* Yellow LED
10* Blue LED
10* Green LED
10* Red LED
10* 22pf Ceramic Capacitor
10* 104 Ceramic Capacitor
10* Resistor (10R)
10* Resistor (100R)
10* Resistor (220R)
10* Resistor (330R)
10* Resistor (1K)
10* Resistor (2K)
10* Resistor (5K1)
10* Resistor (10K)
10* Resistor (100K)
10* Resistor (1M)
1* Resistance Card
2* Pin header (40pin)
5* Electrolytic Capacitor (10UF 50V)
5* Electrolytic Capacitor (100UF 50V)

Hi, how do i post a topic?

Hello to all, I am Julie from the USA.

Hello Julie! I’m Leo from Argentina and I’m glad to welcome you and all the new members of this forum. I hope you make this place your own and find new friends and learnings, and I’m sure we all have things to learn from you. Good Luck! :four_leaf_clover: :four_leaf_clover: :four_leaf_clover:

1 Like

Hello Duncan! Welcome. We’ve just relaunched the forum. Please review this post for user information: http://discuss.littlebits.cc/t/welcome-to-littlebits-discussions/25975

Adding a new topic should be available to you in your user profile. I’ll look into settings for you as well. Thanks!

1 Like

Welcome Julie, glad you joined us!

Hello my name is Susan Fisher and I am the Innovation Specialist for the largest private school in the country that just happens to be based here in Atlanta, Georgia. Most of my role is providing professional development for teachers which hopefully benefits the kiddos indirectly. Nothing better than seeing the faces of the little ones light up! Thanks Littlebits for giving me great tools to make the “magic” happen. Love those Code Kits! My username is fishergirl


Hello Everyone!
I am Trent and I am an Instructional Coach in Atlanta GA. I am all about building, playing, making, inventing, tearing down—rebuilding… and then getting to “traditional” instruction! Looking forward to learning and exploring with everyone else here!


Hi, I’m Justin, a computer scientist from Orange County, CA. My daughter and I have been working for several weeks on building a robotic guinea pig using parts from the Droid kit, an Arduino, a Makey Makey, and an MP3 player. We’ve written enough code to be able to make it squeak when you pet it (using recordings of our live guinea pig), and detect walls so it will turn. I’ll have some questions soon about controlling the DC motor, which doesn’t seem to actually stop when we tell it to. After that, I hope to share pictures and code. Before diving in, though, I wanted to introduce myself and what we’re working on. Nice to meet you all!


Welcome to littleBits Forum, Susan! Glad to keep teachers and kids learning with STEM/STEAM classroom tools. :raised_hands:

Welcome Justin, we’re looking forward to seeing this invention and lots of people here to help you along the way. Please share it in “invention buzz” when you’re ready!