Connector types

[etoivv]

Hi I have had some problem with the connector/wire on the fan and servo..The wire is broken close to the connector and I need to replace the connectors. I am living in Norway and hope someone knows the type of connectors so I can buy it here..
BR Ivar

[JackANDJude]

Hi @etoivy . The connector on the fan looks similar to the JST on the long led. Check out @alexpikkert's investigations on the long led .

Alex also shared pics on how he repaired a broken connection on the vibration motor.

How to repair a broken vibration motor O4

In one of my projects I used a vibration motor (O4) to make some music sounds by plucking the strings of a dulcimer, see http://littlebits.cc/projects/bits-on-a-string After a while the little vibration motor did not survive this musical event and suffered from a broken wire connection... [joy] By activating and slowly turning the motor I discovered the wire was broken just near the little white connector. I searched the internet for this connector (type 2 wire JST SH 1mm pitch) but could not …

For more chats on this topic, click on the magnifying lens and type JST. As always, you are welcome to contact support@littleBits.cc about any trouble you are having with a Bit.

[alexpikkert]

Hi Ivar @etoivv and Jude @JackANDJude,

Indeed the connector from the o13 fan is the same as the connector from the long led. I purchased new connectors including 10cm. wiring at kiwi electronics in the Netherlands, see here:
(they can sell abroad to Norway, no problem)

https://www.kiwi-electronics.nl/jst-2-wire-cable?search=jst

For the servo you will need a 3-pin JST connector, I think (not sure) it might be this one:
https://www.kiwi-electronics.nl/infrared-sensor-jumper-wire-3-pin-jst?search=jst

😊

[ayeshakhan]

Thanks Jude, this will really come in handy.